Estimate shipping
Description
Matching fence panels
Build a consistent lap-style boundary. Pair this gate with our Pressure Treated Super Lap Fence Panels.
Quick answer: A full-height pressure-treated lap garden gate measuring 1828mm high x 915mm wide. It provides a straightforward pedestrian entrance for gardens and side paths, with overlapping timber boards that suit traditional lap-panel fencing.
Product details
| Height | 1828mm |
|---|---|
| Width | 915mm |
| Familiar reference | Approximately 6ft x 3ft |
| Material | Softwood |
| Finish | Green pressure-treated finish |
| Style | Overlapping lap-board construction |
| Suitable for | Pedestrian garden and side-access gates |
Where this gate works best
- Creating access through a traditional lap-panel fence
- Side passages and rear garden entrances
- Replacing an older timber pedestrian gate
- Projects where a simple, closed-board appearance is preferred to lattice or slatted designs
What you will need
The gate leaf is supplied without posts or ironmongery. Installation normally requires suitable gate posts, hinges, a latch or bolt and exterior-grade fixings selected for the gate, post and opening.
Before you order
- The listed dimensions refer to the gate leaf, not the finished opening.
- Measure the opening and allow suitable clearance for the hinges, latch and natural timber movement.
- Check that the supporting posts are suitable for the gate and securely installed.
- This gate is intended for pedestrian garden access, not vehicle or driveway entrances.
- Timber is a natural material, so knots, colour variation, small checks and limited movement can occur as it acclimatises outdoors.
- Pressure treatment improves durability but does not make the gate maintenance-free.
Ordering note: All dimensions are stated in metric. Imperial measurements are included only as a familiar reference.
