For a new slotted concrete-post fence, work in this order: set out the run, install the posts, fit the gravel board, then lower the fence panel on top. Use the actual board and panel dimensions when setting the post spacing rather than relying on the word “6ft”.
1. Work out the finished fence height first
Add the panel height and gravel-board height together before choosing the post. A 6ft panel above a 12in gravel board gives roughly 7ft of fence above ground. Allowing around 600mm of post in the ground means a 9ft concrete post is the normal starting point for that arrangement.
Ground conditions and the finished fence design can change the required depth, so check the job before digging.
2. Set out the complete fence line
Use a string line and mark the start, end, corners and gate positions. Check the exact width of the fence panel and the 1830 × 300mm concrete gravel board. Wern-Wood panels include both 1800mm and nominal 6ft / 1830mm sizes, so do not assume they are identical.
3. Dig and set the first concrete post
For a typical garden fence, around 600mm is a useful working depth. Set the post plumb in both directions and secure it with suitable Postmix. For concrete posts, allow about two 20kg bags per post as a practical starting point; actual hole size and ground conditions can change the quantity.
Follow the Postmix instructions and do not load the post with a heavy concrete board until the footing is sufficiently firm.
4. Use the gravel board to establish the next bay
Position the next post so the gravel board fits cleanly between the slots without binding. Keep checking the string line, post level and board level as the run progresses.
5. Lower the gravel board into the slots
Once the posts are secure, lower the concrete gravel board evenly from above. Check it is supported and level. Concrete boards are heavy, so use suitable help rather than trying to control one alone.
6. Lower the fence panel on top
Lift the timber panel into the post slots and lower it until it sits on the gravel board. Check the top line and make sure the panel is not jammed tightly in the posts.
For replacement bays and panel fitting detail, see How to Fit Fence Panels Between Concrete Posts. For products, browse Concrete Fence Posts, Gravel Boards, Fence Panels and Postmix & Fence Fixings.








