Estimate shipping
Description
Techno Water-Based EPDM Adhesive is specifically designed to bond EPDM rubber roofing membranes to timber substrates such as plywood and OSB. Easy to apply and reliable in performance, this adhesive creates a strong, long-lasting bond between the membrane and roof deck.
Available in 2.5L, 5L and 10L tubs, this water-based adhesive is ideal for flat roofing installations where a clean, controlled application is required.
Suitable Uses
- Bonding EPDM rubber roofing membranes to timber roof decks
- Flat roofs, extensions, garages and garden buildings
- Use on absorbent surfaces such as plywood or OSB
Key Features
- Designed for EPDM roofing – formulated specifically for membrane-to-deck bonding
- Water-based formula – easy to apply with a roller and low odour
- Strong, reliable bond – ensures secure adhesion to timber substrates
- Simple application – ideal for both trade and competent DIY installation
Coverage Guide
- 2.5 Litres: Approx. 8–10m²
- 5 Litres: Approx. 16–20m²
- 10 Litres: Approx. 32–40m²
Coverage will vary depending on surface texture and application method.
Application Overview
- Ensure the surface is clean, dry and free from dust, grease and loose material
- Stir the adhesive thoroughly before use
- Apply evenly to the deck using a roller
- Lay the EPDM membrane into the wet adhesive and smooth out
Important Information
- For use on timber substrates only (plywood or OSB recommended)
- Do not apply to damp or contaminated surfaces
- Do not allow the adhesive to freeze
- Install the membrane while the adhesive is still wet for best results
Need a complete system? Pair with EPDM membrane, trims and accessories for a full flat roofing solution.
